Complaints about noise transmission in the home are on the up. Peter Mayer of ºÃÉ«ÏÈÉúTV LifePlans looks at the choice of acoustic flooring solutions and analyses their whole-life costs

Noise is a modern paradox: we use more noise-generating products than ever in the home yet we want increased levels of peace and quiet. The 2004 changes to Part E of the ºÃÉ«ÏÈÉúTV Regulations, which cover resistance to the passage of sound, have attempted to address this by improving sound insulation for residential buildings.

Part E addresses key areas including separating walls, floors and stairs, internal walls and floors and reverberation in common areas and stipulates minimum performance criteria for airborne sound and impact sound insulation of separating floors. To achieve these standards, housebuilders can either use their own design and subject it to pre-completion sound testing or choose one of six approved separating floor "robust details" solutions, which exceed the minimum standard in Part E by a minimum of 5 dB and therefore escape pre-completion sound testing.

Separating floors



Separating floors are designed to limit or insulate against airborne sound, such as that from a television; impact sound, such as footsteps; and flanking sound - the indirect transfer of sound through the building fabric, usually through the walls separating dwellings. There are four principles to achieving the required sound insulation:

  • Mass The heavier the floor, the less sound is transmitted. Mass is designed into floors by using concrete or the addition of layers of dense material to timber.
  • Completeness of the acoustic element Air gaps and non-uniformity in the floor construction can reduce sound insulation performance. A high standard of installation is required to ensure airtightness and uniformity.
  • Flexibility Flexible floors generally provide better sound insulation. The problem is a certain stiffness is required for structural reasons, and certain frequencies of sounds can be transmitted because of resonance.
  • Isolation The physical separation of a floor reduces the transmission of sound through a structure. The installation of a floating floor, which incorporates resilient layers and uses soft or acoustic floor coverings, is the standard option for achieving separation.
Ceiling treatment in the room under the floor is just as important as the floor structure and floor covering.

Robust details-compliant separating floors



The "robust details" scheme details six principal separating floor solutions for concrete and timber flooring. There are 100 variations of ceiling and floor finishes within these headline solutions to satisfy Part E.

  • Concrete floors There are four robust detail concrete separating floor solutions, which are based on precast concrete floor planks with a directly applied screed, floating screed or insitu concrete slab. A steel deck and insitu concrete composite floor option is also described.
  • Timber floors The robust detail solution is based on I-joist type floor structures.

Whole-life costs



Acoustic flooring falls in the category of long-life components, which means it should not incur a cost through its service life. However, costs may arise when the design or installation does not comply with good practice. The costs of remedial work can include testing, investigation, intrusive repairs and retesting; they are typically in the region of £1000-10,000.

One unknown factor is the long-term performance of the resilient layers used to create a sound-deadening floor structure. Some products have a track record of 20-30 years. Resilient layers with high compressive strength should not deform or compress with use.

Experience suggests that the most important performance issue, and therefore the most important whole-life cost issue for acoustic insulation, is workmanship. Critical areas include:

  • All junctions where air-tightness may be compromised, for example around services and though discontinuous components
  • Compressible resilient layers under areas of localised higher loads such as partitions, or where the compressibility of the floor may conflict with rigid plumbing.
Although designing to the minimum standard may seem a cost-effective solution, the big "but" is that there is a high price to pay for failing to attain it.

Over-specification may at worst reduce the risk of poor sound performance and at best provide sound insulation that is better than the minimum standard for the benefit of the building user.

Related files/tables

Flooring