Manufacturer says work was of 鈥榩oorest standard鈥� it had ever seen
The Grenfell Inquiry has heard more details of how cavity barriers were either installed incorrectly or not installed at all during the ill-fated refurbishment of the west London tower.
Christopher Mort, technical officer for fire at Siderise, the firm which manufactured the cavity barriers used for the refurbishment, was asked to inspect the barriers which were still on the tower a year after the fire in July 2018.
He told Tuesday鈥檚 hearing that the work carried out by subcontractor Osborne Berry was 鈥減robably of the poorest standard I鈥檝e ever seen鈥�.
The installation of the barriers was so flawed that they could not have been corrected and would have had to have been removed and replaced with new material, he added.
Mort said that in some places there was no evidence of holes drilled in the building where the barriers would be fixed, which he said suggested that the barriers had either not been installed at all or were fixed to the structure with silicone.
This would not be in accordance with both how they were tested and Siderise鈥檚 guidance, Mort said.
In other areas, he said he had seen brackets designed to fix horizontal barriers in place being used on vertical barriers. Because these are considerably longer than horizontal barriers, the brackets pierced the end of the vertical barriers.
Mort said that this rendered the vertical cavity barriers 鈥渢otally ineffective鈥� as it indicated that there was a 鈥渃lear void from the end of the vertical barrier to the cladding鈥�.
He added that the consequence of this was that the compartments within the cladding system were not sealed, allowing 鈥渇ire, flame and smoke to travel behind the cladding鈥�.
The refurbishment of the tower used intumescent cavity barriers, which in normal conditions are in an 鈥榦pen state鈥� allowing ventilation, drainage and evaporation, but are designed to expand in the event of a fire and plug any gaps within the cladding system.
The cavity barriers used were designed to expand by 25mm during a fire.
But Mort said that he had seen gaps as large as 140mm within the cladding system 鈥渨ay beyond any form of sensible parameters鈥�.
He said in his witness statement that the consequence of this was that the barriers would have been unable to seal off the compartment during a fire, allowing 鈥渇ire and smoke to travel up the inside of the cladding鈥�.
Counsel to the inquiry Kate Grange QC asked: 鈥淥verall, how would you characterise what you saw during that inspection in terms of the quality of the cavity barrier installation?鈥�
Mort replied: 鈥淚t is probably of the poorest standard I鈥檝e ever seen.鈥�
Grange asked: 鈥淲ould it be fair to say that these were fundamental errors in the installation that no reasonable installer should have been making?鈥� Mort replied: 鈥淐orrect.鈥�
The inquiry has already heard how Osborne Berry had installed some cavity barriers back to front, others with roughly cut edges allowing air to travel through and had in some places installed horizontal cavity barriers vertically.
The inquiry continues.
No comments yet