好色先生TV

Five years after engineer Arup fixed the wobble in the Millennium Bridge, it has applied the lessons learned from that debacle to a much bigger problem: wobbly towers.

A combination of the vibrations inherent in tall structures and the high winds that often buffet the upper floors can create a distinct wobble at the top of them. This can be at best nausea-inducing and at worst terrifying, putting off anybody from wanting to live or work in them.

But the usual way of counteracting such vibration is problematic: beefing up the building with lots of extra structure makes it stiffer and heavier, but takes up a lot of room and is very expensive. To cut vibration by half means either increasing the building鈥檚 mass or its stiffness by a factor of four.

A more effective, less expensive solution was clearly required.

Putting a damper on proceedings

There has traditionally been another solution, which is to use dampers to reduce the vibration. The usual option is tuned-mass dampers 鈥� large weights positioned at the top of a building. However, engineers are reluctant to rely on these, for four reasons:

鈥� There is an issue with reliability. Typically, there is just one damper to take care of movement for each direction the building will move in. 鈥淚f something jams or it fails, it won鈥檛 work,鈥� says Michael Willford, the Arup structural engineer who came up with the Millennium Bridge solution.

鈥� The position of the dampers inadvertently makes it a more costly option. 鈥淭hat鈥檚 hundreds of tonnes of mass at the top, right where the prime real estate is,鈥� says Willford.

鈥� As the name implies, tuned mass dampers are tuned to respond to the frequency of a building鈥檚 natural vibration. However, this can change over time. Concrete progressively gains strength over many years, changing the building鈥檚 natural frequency and rendering the damping less effective.

鈥� Perhaps most importantly, dampers have a damping factor of just 3% to 4%, which in many instances isn鈥檛 enough to take care of vibration without a strengthened structure.

All of which means that damping usually only supplements a heavier, more costly structure. Until now, that is.

The lessons of the bridge

According to Willford, Arup has found a better option: the viscous dampers used on the Millennium Bridge. A viscous damper works by forcing a plunger through a tube filled with oil 鈥� this absorbs the energy that otherwise will cause a building to oscillate (see graphic).

Viscous dampers have a damping factor of 6-10%. This takes care of vibration well enough to keep occupants comfortable 鈥� it鈥檚 equivalent to making the building 44% stiffer.

Willford also says 10% damping means consultants don鈥檛 have to worry about designing structures for resonance. Mechanical resonance occurs when the wind frequency matches the building鈥檚 natural frequency, leading the vibration to become stronger and stronger. This is what caused Washington State鈥檚 one-mile-long Tacoma Narrows Bridge to collapse in 1940.

The other key element is dependability.

A building damped in this fashion would contain 20 to 30 dampers, which means there is plenty of back-up. 鈥淓ven if 50% of the damping failed, the damping effect would work almost as effectively,鈥� says Willford.

He adds that viscous dampers cope well with changes in the building鈥檚 frequency, so can be relied on for the life of the structure.

The Arup solution works by inserting the viscous dampers between key structural elements, which move relative to each other to damp out the vibration (see below). 鈥淚t means we can reduce the structure and foundation size; it鈥檚 faster to build 鈥� which means lower costs 鈥� there鈥檚 more net floor area; it鈥檚 more sustainable as there is less material needed, and there鈥檚 more valuable space at the top,鈥� says Willford.

Arup is using the system on the 60-storey residential St Francis tower in Mandaluyong City, the Philippines, set for completion next year. Willford says the building has an acceleration value of 75 milli-G when key structural elements are locked together, and just 24 milli-G when viscous dampers are inserted between those elements.

Willford claims the amount of concrete needed for the tower has been cut by 30% and the density of steel reinforcement has been reduced from 300kg per m3 to 200kg. This adds up to a saving of $5m (拢2.57m).

If the system is as successful as Arup hopes, the 拢5m cost of fixing the Millennium Bridge鈥檚 wobble could turn out to have been a very good investment indeed.