好色先生TV

Since April 2007, owners or occupiers of non-domestic buildings with five or more occupants, including visitors, have been required by law 鈥� the Regulatory Reform (Fire Safety) Order 2006, or RRO 鈥� to have carried out a fire risk assessment of the premises. Even so, there is little doubt most buildings have not been assessed.

To make matters worse, there appears to be a lack of understanding by some professionals and contractors, including those involved in fit-outs, that a fire risk assessment is required if any alterations are carried out on the building.

James Glocking, technical director of the Fire Protection Association (FPA), asserts: 鈥淲e are aware there is a significant shortfall in the number of buildings that have a valid risk assessment. The likely cause is a lack of awareness of the requirements of the RRO.鈥�

FPA associate director Peter Wilkinson says that following FPA members鈥� responses to a recent evaluation of the RRO, which was commissioned by Communities and Local Government (CLG), it was clear that more effort is needed to promote both the order and need for fire risk assessment.

Wilkinson says members are also concerned that access to guidance is poor. 鈥淢any small-to-medium enterprises (SMEs) are still unaware of the CLG series of fire risk assessment guides, or the web access to them.鈥� (See and search for fire risk assessment.)

Peter Jackman of International Fire Consultants is even more pessimistic about the level of compliance and estimates that less than 25% of all buildings have been assessed. He adds: 鈥淎s well as a lack of awareness, there is also a skills shortage in the fire safety industry. There are a lot of people who are experts in a particular field, such as fire detection, extinguishers or emergency lighting, but very few can take a holistic overview. It is difficult for a single person to do a complete fire risk assessment because the task can be so large.鈥�

Brian Pike, technical manager of Komfort Workspace and a member of the AIS technical committee, agrees that the number of fire risk assessments is low. 鈥淧eople don鈥檛 understand what it鈥檚 all about 鈥� it鈥檚 frightening,鈥� he says.

鈥淎 lot of ex-firemen have set themselves up as assessors, but their expertise is in putting out fires, not putting together the documentation or identifying the composition of the structure. They are totally reliant on what the building occupier tells them.鈥�

Pike鈥檚 main cause for concern, however, is the lack of understanding among some fit-out contractors and building owners about how what is specified and installed can affect the fire performance of a building, particularly if the work is done without professional advice.

鈥淲hilst the owner or occupier of the building is responsible for carrying out the risk assessment, the architect/designer/interior contractor has a duty of care to ensure any work carried out meets all Fire Regulations and that a risk assessment is carried out,鈥� says Pike.

鈥淎 reputable fit-out company will ensure everything is in order. But a lot of fit-outs are subcontracted out to small, inexperienced companies, which may not understand what fire-rating is required or how installation techniques and materials used affect fire integrity.

鈥淔or example, a contractor might have installed a fire door, but is it the right type of frame? It is especially worrying if you can鈥檛 identify all the components. A lot of people don鈥檛 even have a clue about which type of glass to use, or how to install it,鈥� explains Pike.

Jackman agrees: 鈥淚鈥檝e found so many instances where the fire-resistant glass has been installed incorrectly. It is critical that the glass is fitted within a tolerance of 2mm. If not, the glass can fracture within a couple of minutes. Some glass should only be fitted within a metal frame, but you do see it in timber frames.鈥�

He says one of the common failings is that the fire resistance of a building component can be compromised by a follow-on trade. 鈥淵ou can have a plaster and stud wall with a 90-minute rating. Then, an electrician comes along and fits two plastic socket boxes 鈥� one on either side of the wall 鈥� so you end up with a wall with the fire resistance of two plastic boxes.鈥�

Jackman is also critical of Part B of the 好色先生TV Regulations, which he says does not take into account modern methods of construction, such as composite panels. 鈥淭he guidance given doesn鈥檛 recognise the risk.鈥�

So how can building owners and occupiers ensure their building is compliant and above all safe? Pike recommends using a reputable interior contractor to carry out fit-out work.

鈥淎IS members, in particular, go through vetting processes on a regular basis,鈥� he says. 鈥淭hey are generally well-established, experienced companies and benefit from a wide range of support available from their trade association.鈥�

Jackman agrees: 鈥漈here is general agreement that making the owner or operator of the buildings responsible for the fire safety is the way to go. They will soon learn that when installations have been done by professionals, they will achieve a positive assessment more easily.鈥�