好色先生TV

THE CLIENT鈥橲 VIEW

What they said last year

Manchester council decided to use BIM principally because it hopes it will help it manage the building more effectively after completion. It also sees BIM as helping the design and construction teams to fully understand the design, providing greater certainty on site and reducing the risk of the job going over budget and running over programme. It didn鈥檛 make BIM a contractual condition of winning work on this job but the council sought a team that subscribed to its values which included innovative ways of working.

What they say now

John Lorimer, capital programme director for Manchester council, says there have been 鈥渢angible gains鈥� from using BIM on this project. The construction phase has gone very well because of the integration of design in the BIM model. It has been used to plan sequencing of work, engaging with the supply chain to give everyone involved in the project the certainty that the objectives could be achieved, making this difficult refurbishment less risky and more likely to come in on time and budget. 鈥淲e are really pleased with how it is going and have already had cash benefits before we鈥檝e got to the FM stage, so we are quids in already,鈥� he says.

The certainty in both the detailing and sequencing of works enabled the team to agree a 1% reduction in the risk allowance for design development, while identification of clashes in the virtual environment allowed a 0.25% reduction in the risk allocation. These savings were reinvested into the scope of works.

You can鈥檛 impose bim on people - they have got to want to do it and go over and above their usual job specification

John Lorimer, Manchester council

The council says there have been time savings too. BIM helped to reduce the programme for the complex vertical circulation core by nine months, after it revealed many clashes between temporary and permanent works in the original plan. An overall reduction of eight months to the contract programme has been achieved.

Lorimer adds that BIM is being used on a new 拢20m cultural centre - a condition of this job is to work in a BIM environment and hand over the model at the end for FM. 鈥淏IM is becoming part of this organisation鈥檚 life and there is no stopping it now,鈥� he says, adding that the day when all Manchester council building contracts stipulate using BIM has crept up more quickly than expected. He says:鈥滻t wouldn鈥檛 surprise me if we are saying you won鈥檛 work for us unless you use BIM next year.鈥�

Any downsides?

As the job has progressed the team has found the 3D laser survey wasn鈥檛 totally accurate. 鈥淥nce you start interrogating it, you realise it has shortcomings,鈥� says Lorimer. This means additional surveying has been necessary to ensure the construction information is spot-on and the information used to operate the building is accurate.

The big lesson is that the client needs to understand clearly what it wants from the model to operate the building effectively. 鈥淥ne of the disadvantages on this project is we didn鈥檛 articulate our objectives clearly enough,鈥� explains Liam Brady, Manchester council project manager. 鈥淚f we could turn the clock back we could have really set out our stall.鈥�

He adds that a project execution plan is essential to help the design and construction teams to create a model suitable for building operation. Brady has the job of going through all the information and creating an FM model for the building.

Any other tips?

鈥淵ou can鈥檛 impose BIM on people - they have got to want to do it and go over and above their usual job specification,鈥� says Lorimer. 鈥淚f something goes wrong because of poor exchange of data there needs to be the enthusiasm and will to resolve it.鈥�

THE CONTRACTOR鈥橲 VIEW

What they said last year

Laing O鈥橰ourke uses BIM regularly because ultimately it saves the contractor money. BIM gives the team a better understanding of the job, which means more detailed and accurate information can be sent out to the supply chain. This means the job is less risky so specialists don鈥檛 have to factor in as much risk pricing. Once the job gets to site most of the potential problems should have been ironed out in the model, so the job is more likely to be delivered on time and on budget.

What they say now

Laing O鈥橰ourke has found BIM particularly useful for refurbishing a listed building as it has made liaising with English Heritage much easier. The conservation body has to satisfy itself that all the interventions made by the contractor are necessary.

One major intervention was the insertion of the new vertical circulation core which has involved putting in new columns, taking out existing transfer structures and cutting into floor slabs. This involved placing a jack between the column and the existing beams and slabs. The jack was pressurised to take the loads from the slab allowing the existing beams to be removed. The jack was filled with grout to lock it into position.

鈥淭rying to explain this two-dimensionally to English Heritage was almost impossible,鈥� explains Graham Fenton, Laing O鈥橰ourke鈥檚 project manager. 鈥淲e had a workshop and built it up piece by piece and indentified exactly how much structure we needed to take out. It was a great advantage.鈥�

The original method relied on extensive temporary works to take the loads while the columns were positioned. 鈥淲e totally turned the methodology on its head using the BIM model,鈥� explains Fenton, adding that this saved money on the temporary works.

The model has also been used to plan logistics, including the position of the site hoarding, and to plot vehicle-turning circles to ensure they had enough space. And it was used for planning the location of site services, including fire, muster and recycling points.

Other advantages include being able to accurately predict how much concrete was needed for pours and how many lorries were needed to take rubble away. It has also helped avoid clashes with the services installation. 鈥淚t gives you predictability and takes the guesswork away,鈥� says Andy Radley, Laing O鈥橰ourke鈥檚 BIM manager.

Any downsides?

Laing O鈥橰ourke commissioned its own 3D laser survey of the critical vertical circulation core because of the shortcomings with the original. 鈥淲e needed to be absolutely sure that everything in this area was right,鈥� explains Radley. Laing O鈥橰ourke has also had to train suppliers to use the software if they aren鈥檛 used to working in 3D and supply drawings in 2D if needed.

THE QS鈥� VIEW

What they said last year

Cost consultant Davis Langdon was the BIM party pooper as it was working from traditional drawings produced from the model. DL said it would like to start using BIM for cost planning.

What they say now

According to associate Stephen Naismith, 鈥淎 hell of a lot has gone on at Davis Langdon鈥� since last year. It has set up a BIM steering group to see how it can benefit from BIM, and Naismith represents this group in Manchester. 鈥淲e are getting something out of this in terms of knowledge gathering and how we fit into the process,鈥� says Naismith.

Potential benefits include using the model for cost estimating and planning, controlling variations and the implications of change to the programme. 鈥淏IM allows us to have a more complete view which makes our cost estimates more robust and communicative,鈥� says Naismith. The big win will be to use the model for whole-life costing.

Any downsides?

BIM hasn鈥檛 been used as a cost planning tool on this project. When BIM is used for cost planning designers may have to produce their data slightly differently.

THE DESIGN TEAM鈥橲 VIEW

What they said last year

The big benefit is the production of a model where architectural design is integrated with the M&E, structure and pedestrian flows. This is useful for multidisciplinary design meetings as everyone can see what is being discussed. A co-ordinated model leads to fewer clashes on site.

What they say now

For BDP environmental engineering director Robert Ferry, increased collaboration is the biggest benefit. 鈥淭he biggest advantage on this project is the BIM agenda and M&E contract has really pushed collaboration. I鈥檝e never seen anything like this project,鈥� he says. 鈥淵ou get a much better understanding of the building and the ability to sit down around a virtual model and work in real time to solve problems.鈥�

URS structural engineer Jim McNally found BIM invaluable for planning temporary works as the building was dismantled and says it reduced the amount of temporary works needed. It also delivered greater predictability.

鈥淭here have been less unseen events and less trips to site than you would have expected from a building of this type,鈥� he says. 鈥淭here鈥檚 been more predictability and certainty.鈥�

Ryder architect Lee Taylor found BIM useful for conveying design information and intent, which made discussion with English Heritage much easier. Ryder has used the model to produce construction information, clash detection and problem solving on site - it illustrates the problem, which makes it easier to find solutions.

Taylor adds that BIM has got everyone more involved in the whole project. 鈥淚t helped our understanding of the role of the temporary works, an area we wouldn鈥檛 have traditionally been involved in.鈥�

Any downsides?

Taylor reiterates that the model hasn鈥檛 been used to its full advantage as many specialists only work in 2D. 鈥淲e have modelled some elements for specialists if these are very important and have a co-ordination impact,鈥� he says.

THE SPECIALIST鈥橲 VIEW

What they said last year

M&E specialist NG Bailey finds BIM ideal for co-ordinating complex services installations. It is useful for seeing how prefabricated modules fit into buildings, ensuring there is space for maintenance staff to access installations and explaining this to clients and the rest of the project team.

What they say now

Shoehorning complex and sophisticated services into an old building has made this job particularly challenging so services engineer BDP has worked with NG Bailey during the installation phase. BIM has been very helpful for simplifying and rationalising the design and making tweaks for areas where the building differs from original expectations. Prefabrication was ruled out due to the limited space for bringing elements into the building; instead BIM has been used to generate cutting lists so pipework arrives cut to the right size with labels identifying where it needs to go.

The model also revealed that services were so densely packed in at the top of the basement corridors that it made sense to paint these areas before installation rather than afterwards. 鈥淭raditionally there is a problem with damage to the services by other trades but this hasn鈥檛 happened here,鈥� says Tony O鈥機onnell, NG Bailey鈥檚 design manager.

Another benefit is being able to print out a 3D view of the area being worked on to help the workers to understand it. 鈥淭hey were doing isometric sketches on the drawing - now they can take a snapshot of the model and take it out on site,鈥� says O鈥橠onnell.

Any downsides?

O鈥橠onnell says the design has taken 10%-15% longer but doesn鈥檛 see this as a downside. 鈥淲e reckon that will be more than paid for in terms of a simpler installation, reducing the number of clashes, aiding sequencing and a more effective installation,鈥� he says.

Because small installers only work from 2D drawings, these have to be specially labelled. 鈥淵ou can spend a hell of a lot of time labelling the drawings,鈥� he says.
Another issue is that component manufacturers work with different software packages, which aren鈥檛 compatible with the model used on this project. O鈥橠onnell says this is becoming less of a problem as manufacturers are beginning to use compatible software.