好色先生TV

INTRODUCTION

Air pollution is detrimental to human health and to the ecosystems that humans rely on. It is an issue not only locally but at a national, European and global level, as pollutants released in one area can be transported by the atmosphere to cause poor air quality elsewhere. In Europe, air quality has improved over recent decades as emissions of many pollutants have decreased substantially, but concentrations of air pollutants remain unacceptably high. According to the European Environment Agency (EEA), a significant proportion of Europe鈥檚 population live in areas where EU air quality standards are exceeded. The EEA says that air pollution reduces human life expectancy by more than eight months on average and by more than two years in the most polluted cities and regions.

This CPD will focus on NOx gases, air quality targets and the role that building designers can play in helping to reduce air pollution.

TYPES OF AIR POLLUTION

The main air pollutants include particulate matter, ground-level ozone, NOx gases, SOx gases, carbon monoxide and lead.

Particulates are tiny particles of solid or liquid material suspended in the atmosphere, generally classified into two main groups according to their size.

• PM10 covers particles of between 2.5渭m (micrometres) and 10渭m in size. Examples of such coarse particulates are smoke, dirt and dust from factories, farming and roads, or mould spores and pollen.
• PM2.5 covers fine particles that measure less than 2.5渭m. Examples would be toxic organic compounds or heavy metals, produced by cars, burning organic matter, and smelting and processing metals. These cause the greatest damage to human health because they can pass further into the respiratory system.

NOx refers to two gases which are oxides of nitrogen: nitric oxide (NO) and nitrogen dioxide (NO2).

When nitrogen is released during fuel combustion, it combines with oxygen atoms to create nitric oxide (NO). This further combines with oxygen to create nitrogen dioxide (NO2). Nitric oxide is not considered to be hazardous to health at typical ambient concentrations, but high concentrations of NO2 cause inflammation of the airways. Long-term exposure can increase the risk of respiratory conditions, decrease lung function and aggravate the effects of other allergens. High levels of NOx pollution can also have a negative effect on vegetation, causing leaf damage, stunting growth and making plants more susceptible to disease and frost damage.

Both NOx gases also react to form smog and acid rain, and contribute to the formation of particulate matter and ground-level ozone.

Sources of NOx

NOx gases are produced by the reaction of nitrogen and oxygen gases in the air during combustion, particularly at high temperatures. This occurs in car engines, but they are also produced naturally by lightning. In areas of high motor vehicle traffic, such as large cities, the quantity of nitrogen oxides emitted into the atmosphere as air pollution can be significant.

According to figures from the EU, road transport was responsible for the greatest share of NOx emissions in 2011, accounting for 40%, with energy production and distribution producing 21%.

According to the City of London Air Quality Strategy 2011-2015, major roads contributed 65% of NOx emissions in the City, and commercial gas boilers 26%.

AIR QUALITY TARGETS

All EU member states are required to control air pollution to health-based levels set by the European Commission, and report national emission totals each year.

The EU National Emissions Ceilings Directive sets limits on the total annual emissions of air pollutants. According to EEA data for 2010, 12 states exceeded one or more of these limits, with NOx the pollutant for which most excesses were registered.

In addition, the EU Ambient Air Quality Directive and fourth 鈥渄aughter鈥� (or substance-specific) directive set limits for concentrations of a range of pollutants in outside air. These may be either target values, which are to be attained where possible by taking all necessary measures not incurring disproportionate costs, and limit values, which are legally binding parameters. The European Commission can take action against any member state if air quality does not meet the limit values throughout its territory. There are currently two limit values set for nitrogen dioxide. The first is that hourly concentrations should not go above 200渭g/m3 for more than 18 hours in any year. The second is that the annual average should be no greater than 40渭g/m3.

Air quality in many large cities in England and Wales does not meet the European annual average limit value for nitrogen dioxide, and in central London, air quality adjacent to some busy roads does not meet the hourly average limit value.

The UK is also a signatory to the Gothenburg Protocol, originally signed in 1999 and amended in 2012. This is part of the United Nations Economic Commission for Europe (UNECE) Convention on Long Range Transboundary Air Pollution, and sets emissions reduction targets to be achieved by 2020. These concern sulphur, NOx, volatile organic compounds and ammonia. Europe鈥檚 NOx emissions are to be cut by 41% compared with 1990 levels.

In England and Wales, all local authorities have a statutory duty to assess air quality under Part IV of the Environment Act 1995. If levels of pollution do not meet government objectives, the area must be declared an Air Quality Management Area and an action plan implemented to reduce levels of pollution. In March 2011, the UK government also published a national air quality strategy, which sets out objectives that local authorities are required to meet and policy options to further improve air quality.

Air quality in the City of London is among the worst in the UK, due to the density of development and its geographical location, and it does not meet objectives for either annual average or hourly average nitrogen dioxide levels, or for daily average particulate matter (PM10). The Greater London Authority estimated that in 2008, there were 4,267 premature deaths in London that could be attributed to long-term exposure to fine particles (PM2.5). As a consequence, the City has been declared an Air Quality Management Area for these two pollutants, and in 2010, the City of London published its Air Quality Strategy 2011-2015 to reduce nitrogen dioxide and both PM2.5 and PM10. The mayor of London also published an air quality strategy called Clearing London鈥檚 Air in 2010.

Both of these strategies focus on reducing emissions from transport and fuel combustion, and from the construction and demolition of buildings.

THE ROLE OF BUILDING DESIGNERS

好色先生TV designers can assist efforts to reduce air pollution by specifying products and systems that can reduce emissions of NOx gases by improving energy efficiency, or by reducing reliance on fossil fuels. Approaches could include:

• Better insulating buildings, so that pollution from the burning of fuel for heating systems is reduced
• Improving the efficiency of heating and air-conditioning systems
• Including low-carbon or low-polluting energy production, such as solar photovoltaics or solar thermal systems, on roofs or facades
• Specifying green roofs, which can help to reduce air-conditioning costs, and potentially improve localised cooling from evaporation/evapotranspiration from the system and the plants. Green roofs can also trap dust and fine particles to reduce particulate pollution.

Aside from reducing the fuel consumption of buildings and the car journeys associated with them, building designers can also choose from an increasing number of building components that actively reduce the concentrations of harmful pollutants in the air. For example, Icopal鈥檚 Eco-Activ roofing membrane is coated with a granular titanium dioxide finish, called Noxite. In the presence of ultraviolet light from the sun, titanium dioxide acts as a catalyst to help break down NOx particles into harmless levels of nitrates, carbon dioxide and water, which are then washed away by the rain.

Icopal commissioned independent testing from several research organisations, which was then passed to the British Board of Agr茅ment (BBA) for validation.

• UL Environment carried out NOx degradation tests on a sample of the roofing, and estimated that, over the 20-year life expectancy of a roof, between 417g and 4,143g of nitrogen oxides per square metre of roof could be absorbed and degraded from the atmosphere. This takes into account the likely degradation in performance of the photocatalytic material itself.
• The Centre Scientifique et Technique du B芒timent (CSTB) in France simulated a polluted urban environment, using a 275-litre simulation chamber to expose an Eco-Activ membrane to a blend of nitrogen monoxide (about 220 parts per million) and nitrogen dioxide (about 50ppm), subjected to UV radiation. Over a seven-hour period, there was an 89% reduction in NOx levels, compared with an 8% reduction when the Noxite membrane was not in the chamber.
• Dutch research institute TNO conducted a series of tests, which included both laboratory tests and installing the product at Schiphol airport in Amsterdam. Laboratory tests involved using a bell-glass sample and calculating the difference between NOx levels in incoming and outgoing air. This showed an effective deposition velocity of 0.4-0.8cm-s-1. At Schiphol airport, the effectiveness of the roofing in removing nitrogen oxides was calculated by measuring the amount of nitrate and nitrite within rainwater which had been in contact with the roof, collected from drainage pipes, and comparing it to rainwater which had not been in contact with the roof. The results showed an effective deposition velocity of 0.1cm-s-1.

The BBA concluded that Noxite granules had a significant depolluting capacity when added as a mineral finish to waterproofing membranes.