好色先生TV

It is rare to find a construction job that produces such an enormous sense of pride among the project team. The team working on the renovation of the Elizabeth Tower, the building popularly known as Big Ben, universally kick off a conversation about the project by saying what an honour it is to work on such an internationally famous architectural icon. 鈥淚t鈥檚 the most iconic building in the world for me,鈥� enthuses Nick Sturge, project manager for the special projects arm of contractor Sir Robert McAlpine, by way of example. 鈥淚t鈥檚 such a privilege to be able to call this my office. When you talk about this job with friends and family they are really interested 鈥� usually when I talk about work their eyes glaze over.鈥�

The Elizabeth Tower is one of London鈥檚 most instantly recognizable icons and is one of the top 10 most Instagrammed places in the world. Completed in 1854, the 96m high, neo-gothic tower is the work of architect Charles Barry who added a clock tower to his final designs for the Palace of Westminster reconstruction after it burnt down in 1834.

鈥淲e鈥檝e tried everything to keep the water out 鈥� buckets, mainly鈥�

Adam Watrobski, principal architect, Houses of Parliament

The grade I-listed tower is into the second year of a 拢61m refurbishment. The work includes conserving and restoring the stonework, cast iron roof, the clock and clock faces. New services are being installed including fire alarms and a lift. Historically, the building has needed attention about every 30 years, with the last major refurbishment taking place in 1983鈥�85, but this latest one is significant as it is the precursor to the wider restoration and renewal of the Palace of Westminster, which is set to start after the work completes on Elizabeth Tower in 2021. 

鈥淭he clock has enormous international importance and is a symbol of our democracy. It is important that it is working during the renovation and renewal of the Palace of Westminster,鈥� explains Adam Watrobski, the principal architect for the Houses of Parliament. 鈥淚t also needed doing.鈥� Restoring such a sensitive, historic building is always going to be challenging but this is one of the nations most treasured which inevitably puts added pressure on the project team.

Challenges

Establishing the extent of the work needed was difficult because of the height of the tower. 鈥淥ne of the big challenges are the unknowns with the stone and roof, which is why we needed to get the scaffolding up quickly,鈥� explains Charlotte Claughton, senior project leader for Parliament Strategic Estates. The stone turned out to be in better condition than expected but the roofs were in a worse state. A reassessment of the job revealed it was more complex and expensive than the original estimate of 拢29m and last September the parliamentary authorities announced the budget had jumped to 拢61m, prompting a chorus of disapproval from MPs.

Getting the scaffolding up was the first job, starting in April 2016. At 104m high it has been an extremely expensive undertaking, costing 拢3.5m. And with its 24,000 elements, it has also been a highly complex one which has taken two years to put together. It is also largely self-supporting. 鈥淭his is thought to be the largest freestanding scaffold in the world at the moment,鈥� says Claughton. The cost of accessing the upper reaches of the tower means more resources have been concentrated here to ensure the work lasts as long as possible; Watrobski says he is targeting 60 to 80 years before the next major refurbishment.

The Elizabeth Tower is hemmed in by structures on three sides which added to the cost and complexity. These include a set of redundant steps and an underground tunnel to the north, a parliamentary building abutting the tower on the south side and a colonnade walkway linking office building Portcullis House to the Palace of Westminster to the west. 鈥淭he only side we could put scaffolding down to the ground was on the east and even that had its challenges,鈥� says Will Rycroft, project manager with Lendlease who is working with Claughton on the project.

The solution was to erect four, 30m-high freestanding towers on each corner of the tower. These support trusses running east to west on the north and south sides of the tower. The scaffolding is supported by the trusses on the north and south sides 鈥� the scaffolding below the truss is suspended. The scaffolding is a Layher system that does away with separate couplers, which were considered at risk from being dropped from height. The towers and trusses were designed in-house by the McAlpine Design Group.

Access

Lifting the trusses into place was a major operation, necessitating the closure of Bridge Street, the main road at the western end of Westminster Bridge, for a week last June. 鈥淭he road closure took nine months of planning,鈥� says Rycroft. The trusses were brought to site in four pieces, joined together and lifted into place from the road with a 300-tonne crane. A second crane in New Palace Yard was used to position the truss on the south side of the tower. 鈥淣avigating it around the tower would have been impossible,鈥� Sturge says.

Movement of materials up and down the tower is taken care of by an extra-wide hoist selected to enable the 4.2m-long minute hands of the clock to be taken down in one piece. Getting materials into site is also a challenge because of the tight security requirements and to avoid disrupting parliamentary business. Loads are bundled up and security checked at an offsite consolidation centre with notice of every delivery given in advance to the Palace of Westminster. This requires careful advance planning, as does the job itself 鈥� the tower is only 12m by 12m and the whole site isn鈥檛 much bigger. 鈥淲e are working in a footprint of 15m by 15m so co-ordination between the trades is really important,鈥� explains Sir Robert McAlpine鈥檚 Sturge. A daily meeting takes care of the co-ordination issues, with a meeting every two weeks used to plan work six weeks ahead.

Stone and roof

With access sorted out, the stone has been steam cleaned, with stubborn areas of dirt blasted off using the Jos system which uses a fine particulate. Like the Palace of Westminster, the tower was built using a sand-coloured magnesium limestone from the Anston quarry in Yorkshire. Unfortunately a combination of poor quality control at the quarry and the corrosive effects of the polluted London air has caused this to decay badly. Damage from a Second World War bomb on the south side has not helped matters either.

As the supply of Anston stone dried up in the early part of the last century, Clipsham stone from Rutland has been used for repairs ever since 1928. This features a coarser grain and is a cool beige colour compared with Anston. 鈥淵ou can read the patchwork of repairs on the building over time,鈥� says Andrew Dobson, associate at Purcell, the architect for the works. Some 40%-50% of the original stone has already been replaced with Clipsham stone. 

The stone is currently being assessed to establish its condition. Degraded Anston stones will be redressed where possible or replaced if beyond repair with Cadeby stone, which comes from the same belt as Anston, in Yorkshire. 鈥淚t鈥檚 extremely successful; the stone masons like it and to all intents and purposes it鈥檚 the same material as the Anston,鈥� says the Houses of Parliament鈥檚 Watrobski. The Clipsham stone is mostly in good condition and will be left in place unless damaged. A record of the state of every stone is being made to monitor the rate of future decay and inform the next set of repairs.

Now the scaffolding is at full height, the cast iron roof is being dismantled and assessed for damage. The Elizabeth Tower features a 30m-high, all-iron roof. The tiles are made from cast iron measuring up to 600mm long and 400mm wide and are being numbered and removed from site for assessment and repair. The cast and wrought iron structure will be restored in situ. During 好色先生TV鈥檚 visit, Watrobski receives some unwelcome news. 鈥淭he roof is in much worse condition than we thought,鈥� he says. 鈥淭he work done in the 1980s was done in situ and hasn鈥檛 lasted as well as we thought it would have done.鈥� He adds that a wider programme of roof restoration work on the Palace of Westminster going since 2009 has given the team a much better understanding of the best way of doing it.

Clock

The glass in the clock faces is being removed at the same time as the work on the stone and roof. First, the clock hands had to be removed.

A scaffolding runway system was used to carefully move the hands in a vertical position to the sides of the clock face. Then the hands were moved into a horizontal position, gently manoeuvered into the hoist and lowered to the ground. 鈥淭hey were surprisingly light,鈥� says Sturge. 鈥淲e were expecting the hands to weigh around 300kg but they were 100kg.鈥� The hands from all four sides of the tower have been removed, with replica hands installed on the east face, which is being left in situ for now. These will be powered by an electric clock so the public can continue to use Big Ben to tell the time.

Each clock face features a cast iron frame holding 312 pieces of opaque glass. The glass is old, brittle and has suffered from ad hoc repairs after bird strikes over the years, so will be replaced. The frame will be stripped, repaired and repainted and gilded before new glass goes in. To replicate the original, cylinder glass will be used as this 鈥渢winkles鈥� when the light catches the imperfections at certain angles. The volume of glass needed has meant going overseas. 鈥淲e鈥檝e had to go to Europe to procure it as there is nowhere in the UK that can produce it on this scale,鈥� says Watrobski. The plan is to complete the north face first and fit the replica hands and electric clock so work can start on the east side.

Internally the tower is being updated to make it more visitor and staff friendly (although it can be visited by the public only via special request to their MP). Currently the only way up the tower is via 334 stairs. A lift is being shoehorned into a ventilation shaft and will be used by staff and to evacuate visitors in emergencies. 鈥淐urrently it would take two hours to get a patient out,鈥� explains Watrobski who says they have to be lowered on a complex abseiling rig. The iron roof structure starts at belfry level and gets in the way of the lift mechanism so this terminates on the floor below. A simple platform lift allows people to complete the ascent.

A wall built in the 1950s at the top of the stairs, in front of the 13.7 tonne Great Bell, popularly known as Big Ben, will be removed as part of the work and replaced with a glazed enclosure. Removing the wall will help ventilate the stairs 鈥� which suffer from condensation problems 鈥� and provide a better visitor experience. 鈥淭he first thing you will see will be Big Ben rather than a big wall. We鈥檝e recreated the view that the tower had when it was first built,鈥� says Dobson. 

Ironically one of the few items in this refurbishment that won鈥檛 be touched is Big Ben itself. This has been silenced for the duration of the works for health and safety reasons 鈥� Rycroft says standing near the bell when it tolls really shocks people, which is dangerous at height as well as being damaging to workers鈥� hearing. It will sound for important national events, but the country will have to wait until 2021 鈥� when this complex refurbishment is complete 鈥� for Big Ben鈥檚 sonorous bongs to be fully reinstated.